Skip to main content
Version: Latest

Surface processes

Tectonics builds relief, and erosion and sedimentation reshape it, which in turn changes the loads that drive deformation. DES moves the nodes of its top surface by a height change each step and records the new material with markers. control.surface_process_option selects how is computed:

OptionSurface processDimensions
0none (default)2D, 3D
1diffusion of topography2D, 3D
11coupling to the landscape evolution model GoSPL (build with usegospl=1)3D
101a custom routine in the source2D, 3D
102diffusion with terrigenous, hemipelagic and pelagic deposition2D

Diffusion of topography​

Option 1 treats hillslope transport as diffusion of the surface height ,

with the diffusivity = control.surface_diffusivity (m²/s). It is applied explicitly on the top nodes, using the slopes of the adjacent surface facets; the ends of the surface reflect, so no material leaves through the sides. In 2D the base level control.surf_base_level divides land from sea: erosion above it is scaled by control.surf_diff_ratio_terrig and deposition below it by control.surf_diff_ratio_marine.

Marine deposition (2D)​

Option 102 adds three sources of sediment to the diffusion.

Terrigenous. Sediment arrives from both ends of the profile at the cross-sectional rate control.terrig_sediment_area (m²/s) and fills the basins below base level. Within a basin it spreads by diffusion whose coefficient decays with water depth ,

with = control.terrig_sediment_diffusivity and = control.terrig_depth_coefficient, so it settles mostly near the shore. A basin that fills passes the rest of the supply on.

Hemipelagic and pelagic. Below base level, sediment settles from suspension at

a hemipelagic band centred at depth = control.hemipelagic_max_depth with width = control.hemipelagic_width and rate = control.hemipelagic_sedimentation_rate, and a pelagic rain = control.pelagic_sedimentation_rate that reaches its full rate over the depth = control.pelagic_increasing_width.

Sediment markers​

Moving the surface changes the volume of the top elements. At every mesh quality check (mesh.quality_check_step_interval), the markers of the top elements are relocated for the accumulated surface change, and elements that gained volume receive new markers of material mat.mattype_sediment, stamped with their deposition time. The sediment can then be followed through burial and, with mat.phase_change_option = 3, compaction and metamorphism; see Markers and phase changes. mesh.meshing_sediment = yes refines the mesh in sediment during remeshing.

Water load​

With bc.has_water_loading = yes, parts of the top surface below control.surf_base_level carry the weight of sea water of density bc.sea_water_density, so the base level is also the sea level.

Coupling to GoSPL​

Option 11 hands the surface to GoSPL, a landscape evolution model with river incision, hillslope processes and deposition. Every coupling interval DES sends the velocity of its top surface; GoSPL evolves its own surface and returns the height change. The setup, build and parameters are in the GoSPL tutorial.

Parameters​

ParameterMeaningDefault
control.surface_process_optionsee the table above0
control.surface_diffusivity (m²/s)1e-6
control.surf_base_levelbase level and sea level (m)0
control.surf_diff_ratio_terrig, control.surf_diff_ratio_marinediffusivity ratios on land and under water1, 1
control.terrig_sediment_areaterrigenous supply per unit width (m²/s)3.17e-7
control.terrig_sediment_diffusivity, control.terrig_depth_coefficient (m²/s), (1/m)3.17e-6, 5e-4
control.hemipelagic_sedimentation_rate, control.hemipelagic_max_depth, control.hemipelagic_width (m/s), , (m)3.17e-11, 40, 90
control.pelagic_sedimentation_rate, control.pelagic_increasing_width (m/s), (m)1.585e-12, 30
mat.mattype_sedimentmaterial of deposited sediment0
mesh.meshing_sedimentrefine sediment during remeshingno